Selling Price -
2024 John Deere 6R Series 6R 150 & 640R Loader
640R Stock# 248351. 0% for 24 Months Available, OAC- 2024
- John Deere
- 6R Series
- 6R 150
- Utility
- family: NJDXL06.8324
- John Deere
- PowerTech™ PSS
- 4.5 L (275 cu in.)
- Rated PS (hp ISO) at rated speed (EU 2016/1628) 97/68EC: 110 kW (150 hp) | Maximum PS (hp ISO) at max speed (EU 2016/1628) 97/68EC: 121 kW (165 hp) | boost: 10 percent
- 4, wet-sleeve cylinder liners with four valves in head
- 2100 rpm
- Turbocharged, fixed geometry first stage, variable geometry second stage, air-to-air aftercooling and cooled exhaust gas recirculation
- level: Final Tier 4 | After treatment type: DOC/DPF/SCR
- peak: At 1600 rpm: 702 Nm (517 lb-ft)
- Rated (hp SAE): 89 kW (119 hp) | 1967 engine rpm at 540 rpm / 1496 engine rpm at 540E rpm / 1962 engine rpm at 1000 rpm | at (1000): 1969 rpm | Intelligent Power Management (IPM) - Additional engine power (hp ISO) at 2100 rpm: 14.9 kW (20 hp)
- torque rise: 40 percent | Rear power take-off: Independent | actuation: Electrical modulation | Front power take-off: 1000 rpm, clockwise rotation (from driving position)
- Diesel
- IVT, 0.05-42 km/h 0.03-26 mph | Reverser: Left-hand electrical reverser
- Rear axle: Electrohydraulic | controls: Full-locking electrohydraulic | Front axle - MFWD: Limited slip / TLS: Limited slip / TLS with brakes: Full-locking electrohydraulic
- Inboard planetary three pinion
- Hydrostatic power
- 420/85R30 (16.9R-30)
- 12 V
- power: Seven-pin electrical socket | Total cold cranking amps: 1200 CCA
- size: 120 amp
- Interval for engine oil change: 500 hours / Interval for hydraulic/transmission oil change: 1,500 hours / Interval for engine coolant change: 6,000 hours
- 71 dB
- rated output: 45 cc pump: 114 L/min (30 gpm) | Wheel tread range- MFWD: 1524-2235 mm (60-88 in.) / TLS: 1524-2235 mm (60-88 in.)
- Closed-center, pressure-and-flow compensated | Number of rear selective control valves (SCVs): Three ISO couplers | Number of mid selective control valves (SCVs): Up to three | SCV control: Mechanical
- Available at a single rear SCV: 100 L/min (26 gpm)
- Rear: Category 2/3N | Drawbar category: Category 2 | Front hitch: Category 3N
- area: 6.11 m2 (65.77 sq ft)
- Working: 14 halogen / Type of bulb in headlight (Halogen, Zenon, LED): 65-W halogen W
- Rear axle: 1552 mm (61 in.) | display: 25.7 cm (10.1 in.) | Front axle center: 840 mm (33.1 in.) | Seat: CommandARM: 7.5 degree / CommandARM: 30 degree |
- MFWD: 2580 mm (102 in.)
- 1680 mm (66.1 in.)
- 4542 mm (178.8 in.)
- 2865 mm (112.8 in.)
- Maximum: 620R: 4115 mm (162 in.) / 640R: 4152 mm (163 in.)
- Rear category (SAE designation): 3600 kg (7937 lb) | Maximum behind lift points: 6800 kg (14,990 lb) | At hook ends: 3300 kg (7275 lb)at full height 620R: 2199 kg (4848 lb) / 640R: 2181 kg (4808 lb)
- Maximum vertical load: 1200-2000 kg (2600-4400 lb)
- 3.33 m3 (117.59 cu ft)
- Crankcase: 16 L (4.2 U.S. gal.)
- Tank: 199 L (52.6 U.S. gal.) | Diesel exhaust fluid (DEF) tank: 14 L (3.6 U.S. gal.)
- 22 L (5.8 U.S. gal.)
- Transmission-hydraulic system IVT: 60 L (15.9 U.S. gal.)
- Base machine: 6500 kg (14,330 lb) | Base machine - Front axle: 2600 kg (5732 lb) / Rear axle: 3900 kg (8598 lb) / Total TLS, IVT, 600/65R38, 540/65R24, shipping fuel, front hitch- Note: will vary based on configuration: 6500 kg (14,330 lb) | Maximum permissible: 9950 kg (21,940 lb)
- Approximate , Open;Cab: 6500 kg (14,330 lb)
- Sensing type: Electrohydraulic | Maximum vertical load: dependent on drawbar position | Rear axle: Flange | Intelligent Power Management (IPM): Transport and/or mobile PTO applications
- Degree of seat swivel, left hand / Degree of seat swivel, right hand / Air suspension | Display: Cornerpost display (right-hand A-post) / CommandCenter™
- North Battleford
- New
- 248352
- 2024
- John Deere
- 6R Series 6R 150
- family: NJDXL06.8324
- IVT, 0.05-42 km/h 0.03-26 mph | Reverser: Left-hand electrical reverser
- Diesel
- Available