Pattison Agriculture

Information

2024 Vaderstad Carrier XL 925 1225

Carrier XL 925-1225 is a trailed disc cultivator, available with 30.5' or 40' (9.25 or 12.25 m) working width. It can be fitted with 20" or 24" (510 or 610 mm) discs. The sizes of the discs make them well suited to incorporate large amounts of crop residues even at depth. The disc angle can be adjusted according to working depth. With a high working speed, it has a working capacity of up to 40 acres (16 hectares) per hour. This lowers the capital costs per acre/hectare to minimum.

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per acre and provides the best start possible for the coming crop.

Carrier XL can be fitted with either 510mm or 610mm TrueCut discs. In comparison, the 510mm disc increases the space around the disc which allows for a higher throughflow. The 610mm on the other hand, enables greater working depth, which is a benefit when incorporating large amounts of crop residues, such as harvested maize stubble

The adjustable MultiSet disc hubs allow the disc angle to be set to one of three positions between 11 and 17 degrees. This enables the disc aggressiveness to be adjusted to fit different working depths.

Thereby a perfect slicing can be achieved during shallow cultivation, and a good penetration can be ensured at a greater working depth.

The large Carrier L/XL 1225 has a working width of 12.25 m, this gives a slight overlap required in a 12 m CTF-system.

Thanks to the x-disc layout, the machine will always run dead straight behind the tractor. This is essential when using GPS-control or when cultivating in hilly terrain.

Carrier L/XL 925-1225 uses the unique Väderstad folding system, giving a fast transition from field to transport. The folding technique has been designed to give the machine a low centre of gravity, resulting in safe manoeuvring.

When folded the transport width is 3 m.

Carrier L/XL 925-1225 is equipped with weight packages in the wing sections. This ensures the weight is evenly distributed across the entire working width without the need for complex hydraulic solutions.

Carrier L/XL 925-1225 has an extremely robust frame, ensuring a long working life even in the toughest conditions. Its few greasing points reduces the maintenance required leading to more time in field.