2024 John Deere 100 Series S100

Selling Price -

$3,850.00

Information

2024 John Deere 100 Series S100

  • 17.5 hp (13 kW) Engine
  • 42-in. Edge™ Mower Deck
  • Hydrostatic Transmission w/side-by-side pedals
  • Spring-assisted hand grip lever raises and lowers deck easily
  • Operator station is wide and comfortable
  • 2 year/120 hour bumper-to-bumper warranty

Features may include:

Powerful engine features full-pressure lubrication for long life

A 17.5-hp (13.0-kW), single-cylinder engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

  • Electronic ignition for fast starts
  • Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
  • Cast-iron cylinder liner for long engine life
  • Overhead valves for excellent power and fuel economy
  • Anti-vibration system
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life, and extending the time between oil changes
  • More effective when operating the tractor on an incline
  • Large fuel filter for trouble-free operation

The no-tools oil drain valve is easy to access when changing engine oil.

FUEL TANK
  • The capacity is 2.4 U.S. gal. (9.1 L).
  • The fuel filler opening is conveniently located under the seat.
  • Filling the tank without spilling is easy.
  • A tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapors inside the tank.
Frame made of full-length welded steel for reliability

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

  • Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
  • One-piece, steel fender deck is bolted to the frame.

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
  • Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
FRONT BUMPER PROTECTS THE TRACTOR

The front bumper is included on the S130, S140, S160, S170, and S180.

  • Additional front-end protection
  • Attractive, bold style
CARGO MOUNT™ SYSTEM MAKES INSTALLATION OF REAR BAGGER AND OTHER ATTACHMENTS EASY

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Snow removal is a strength of lawn tractors

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 46-in. (117-cm) Front Blade
  • Tire chains or TerraGrip traction belts
  • Weather enclosure
  • Weights
Hydrostatic transmission gives an infinite choice of ground speeds

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.

Photos

Highlights

  • $3,850.00
  • Swan River
  • New
  • 251698
  • 2024
  • John Deere
  • 100 Series S100
  • Model: 31R977 (M31) | Overhead valve, full-pressure lube, oil filter
  • 17.5 HP
  • mounting: CargO Mount™ system
  • Gasoline
  • Available
  • with mower: 1402 mm (55.2 in.) | with mower (deflector raised for storage): 1181 mm (46.5 in.) | without mower: 996 mm (39.2 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1016 mm (40 in. )
  • 42
  • BRIGGS & STRATTON

Specifications

  • 2024
  • John Deere
  • 100 Series
  • S100
  • Riding
  • Model: 31R977 (M31) | Overhead valve, full-pressure lube, oil filter
  • 13 kW (17.5 hp)
  • 500 cc (30.5 cu in.)
  • One
  • method: Air
  • Cartridge
  • Bendix type
  • delivery: Pulse pump and carburetor
  • Gasoline
  • Mechanical, viewable from seat
  • Transaxle: Hydrostatic, 2-wheel drive
  • Mechanical
  • Single lever with spring-return on choke
  • Sector and pinion with single drag link and tie rod
  • Mower: Manual power take-off (PTO) | Mower attachability: Single belt
  • Internal wet disk
  • 12 V 300 CCA
  • Regulated, 8 amp
  • 20x8-8
  • 15x6-6
  • Mower: Two
  • Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-5.2 km/h (0-3.2 mph)
  • mounting: CargO Mount™ system
  • Full-length welded steel
  • Two standard, incandescent
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel , diameter: 12 in. 30.5 cm | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 2.3 mm (0.090 in.)
  • Edge™ mower deck: 107 cm (42 in.)
  • 45.7 cm (18 in.) | Uncut circle: 63.5 cm (25 in. )
  • back: 28 cm (11 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1016 mm (40 in. )
  • 1770 mm (69.7 in.)
  • 1242 mm (48.9 in.)
  • with mower: 1402 mm (55.2 in.) | with mower (deflector raised for storage): 1181 mm (46.5 in.) | without mower: 996 mm (39.2 in.)
  • tank: 9.1 L (2.4 U.S. gal.)
  • Maximum: 227 kg (500 lb)
  • 188 kg (414 lb)
  • Transaxle type: TLT200 hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | tank location: Rear | Transaxle: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
  • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, not serviceable
  • system type: pring-assisted hand-grip lever
  • Front axle: Cast-iron front axle, powdered-metal front wheel bushings | Hood material: Molded-in color material reduces sound, will not rust or dent
  • Fender deck: Stamped steel | Mower deck: Stamped steel deck shell | Mower: Steel, 13 gauge
  • One piece | suspension: Tilt, two coil springs
  • Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
  • 2 year/120 hour bumper-to-bumper
  • 42
  • BRIGGS & STRATTON